The Conveyor Module 1 - Festo 8038802 Breve Descripción

7.2 The Conveyor module 1

The module is supplied completely assembled. The attached motor controller permits clockwise and
anticlockwise rotation.
The fact that the workpiece is at the beginning of the conveyor, upstream of the deflector and at the end of
the conveyor is confirmed by optical proximity sensors with fiber-optic cable.
The conveyor belt is driven by a DC gear motor
The workpieces can be ejected by an attached solenoid with deflector.
An analog sensor is attached via a stopper cylinder which is capable of checking the workpiece's
orientation.
© Festo Didactic 8038803
The Conveyor module can be mounted on a profile
plate, a profile foot or a slotted mounting frame. The
DC motor is freely positionable. The Conveyor module
is suitable for transporting and separating workpieces
with a diameter of 40 mm (e.g. "Body" or "Cylinder for
assembly" workpiece sets).
Separating station
35