The Conveyor Module 2 - Festo 8038802 Breve Descripción

Separating station

7.3 The Conveyor module 2

The module is supplied completely assembled. The attached motor controller permits clockwise and
anticlockwise rotation.
The Conveyor module is used to transport and buffer workpieces. Optical proximity switches with fibre-optic
cables are used to check that workpieces are present at the beginning and at the end of the conveyor.
The conveyor belt is driven by a DC gear motor.
36
The Conveyor module can be mounted on a profile
plate, a profile foot or a slotted mounting frame. The
DC motor is freely positionable. The Conveyor module
is suitable for transporting and separating workpieces
with a diameter of 40 mm (e.g. "Body" or "Cylinder for
assembly" workpiece sets).
© Festo Didactic 8038803