SIDE BROOM REPLACEMENT
ENGLISH
28
WARNING!
It is advisable to wear protective gloves when
replacing the side broom because there can be
sharp debris between the bristles.
1.
Drive the machine on a level ground and engage the
parking brake.
2.
Turn the ignition key (51) to "0".
3.
Remove the pin clip (A, Fig. 15), then remove the pin.
4.
(C).
5.
Install on the hub (D) the new side broom with the
6.
Insert the fastening pin and engage its safety clip.
7.
Check and adjust the side broom height as shown in the
previous paragraph.
Remove the broom (B) and recover the protection flange
protection flange.
INSTRUCTIONS FOR USE
SW5500 - 1467287000
Figure 15
D
C
B
09/2016
P100909
A