4. Handling and storing the product
4.1 Handling the product
•
•
•
•
4.2 Storing the product
•
•
•
Related information
• 9.1 Ambient conditions
Close the vent plug when taking the pump out of operation for transport, storage
or service.
Retain the packaging for future storage or transport, or dispose of the packaging in accord-
ance with local regulations.
The packaging depends on the pump type and the scope of delivery.
Make sure the product is suitably protected during transport and intermediate storage.
Keep the product in an upright position.
Do not throw or drop the product.
Close the vent plug when taking the pump out of operation for transport, storage
or service.
Store the pump in an upright position so that the grease cannot leak out.
Store the pump in a dry and clean place.
Observe the permissible ambient conditions.
DMX 221 | | 20