Clear All Network Data From The Displaying Unit; Setup Connection To Pacs And Worklist; Set Up The Displaying Unit For Server Connection; Set Up Connection To Pacs Server - Ambu aBox 2 Instrucciones De Uso

6.5. Clear all network data from the displaying unit

In the Network menu, press Clear all data. Press OK.

7. Setup Connection to PACS and Worklist

Importing a worklist and exporting of imagery requires that the worklist server/PACS (Picture
Archiving and Communication System) server can send and receive data in DICOM (Digital
Imaging and Communications in Medicine) format. Setting up server connections require that
the displaying unit is connected to a Wi-Fi or LAN network (see section 6.1 and 6.2).

7.1. Set up the displaying unit for server connection:

• Press the Settings tab, then press Setup.
• Press DICOM setup
• It is optional to change the Station name
unit if a special worklist needs to be pushed to a specific unit or if it is important to track
from which unit data has been sent from. The default name is AmbuMon and the maximum
length of the station name is 16 characters.
• Press Use serial number or Use custom name next to Station AE title
Use custom name, press the input field and enter the name.

7.2. Set up connection to PACS server:

• Press Add new
25
• Press the input field next to PACS name
PACS connection.
• Press the input fields next to PACS AE title, Host name and Port number
the required information in each field.
• Press the required setting next to TLS
Note: If you enable TLS, you need to import the required TLS certificate from a server or
USB flash drive (see instructions further below).
• Press Test connection
the server connection can be established.
• Press Create
to save the server connection setup.
30
Some PACS systems may require the MAC address and the IP address of the displaying unit.
The MAC address is unique for each displaying unit, while the IP address is assigned by the
hospital network.
Retrieve the MAC address and IP address of the displaying unit:
•
Login as Administrator, then go to Settings - About - Device Info.
•
Depending on whether Wi-Fi or Ethernet is used, find the information tab Network.
The MAC address is a 48-BIT address grouped into 6 octets. In the example below, the MAC
address is highlighted in red boxes depending on the network setup.
22
.
24
22
25
28
30
below PACS servers.
28
29 to verify that the information has been entered correctly and
23
. The Station name is used to recognize the
27
29
26 and enter the name you want to use for the
.
24 . If you selected
23
26
27 and enter
19