Trouble Shooting - Lavorwash FIT 35B Instrucciones Para El Uso

TROUBLE
1.The machine doesn't work
2.Brush doesn't work
3. Vacuum motor doesn't work
2. No water sprayed
3. Cleaning performance is not
good as before
4. Water leakages when machine
stops
58

25 TROUBLE SHOOTING

POTENTIAL REASON
1. fuse break
2. battery in low power
3. battery connecting wire
loose
4. Switch in failure
1. Battery in low power
2. Switch in failure
3. Brush tangles with wire or
some obstacles
4. Brush motor in failure
1. Battery in low power
2. Switch in failure
3. Vacuum motor in failure
4. Suction blocked
1. no water in solution tank
2. water tube is blocked
3. Electric valve in failure
1. Seal gasket wears out
2. The squeegee wears out or
need to be cleaned
3. Sponge filter is blocked
4. Recovery tank doesn't fit
well
1. The Electric valve is blocked
by some obstacles
SOLUTION
1. change the fuse
2. charge or replace battery
3. check the battery connection
wires
4. Change the switch
1. charge or replace battery
2. change the switch
3. clean the brush
4. check the brush motor ,
1. charge or replace battery
2. change the switch
3. check the motor
4. Check the filter (D)
1. Add water in the solution
tank
2. Check the water tube
3. Test the valve
1. Change the gasket
2. Change or clean the
squeegee
3. Change or wash the filter
4. Check and place the recovery
tank well
2. Disassemble and check the
valve
EN