Battery Type; Recharging The Battery - Lavorwash FIT 35B Instrucciones Para El Uso

7. Rotate the stop lever of the handlebar (4) in the direction of the arrow (Fig.5).
8. Close the command handlebar, pushing the handle (5) towards the main part of the appliance
(Fig.6).
9. Rotate the stop lever of the command handlebar (4) in the direction of the arrow (Fig.7).
10. To raise the device off the fl oor, use the handle (6) on its rear (Flg.8).
ATTENTION: when transporting the appliance on vehicles, secure it fi rmly in place in
accordance with the directives in force so that it cannot slide or tip over. accordance with the directives in force so that it cannot slide or tip over.
ATTENTION: these operations must be carried out using protective gloves to avoid any possible
contact with the edges or tips of metal objects.
To power the appliance, use only the battery supplied in the package or by a specialised technician.
OTHER BATTERY TYPES CANNOT BE USED. The appliance is powered by a lithium-ion battery. The
battery compartment can accommodate a single battery slot at 24V.
ATTENTION: for the maintenance and disposal of the battery read the document supplied
by the battery manufacturer.

17 RECHARGING THE BATTERY

The battery must be charged prior to the fi rst use.To recharge the battery, proceed as follows:
1 Take the appliance to the dedicated battery recharging area
EN

16 BATTERY TYPE

39