Purpose And Content Of The Manual; Target Group; Storing The Use And Maintenance Manual; On Delivery Of The Appliance - Lavorwash FIT 35B Instrucciones Para El Uso

1 PURPOSE AND CONTENT OF THE MANUAL

The aim of this manual is to provide customers with all the information needed to use the appliance
in the safest, most appropriate and most autonomous way. It includes information concerning
technical aspects, safety, operation, appliance downtime, maintenance, spare parts and scrapping
. Operators and qualified technicians must read the instructions in this manual carefully before
carrying out any operation on the appliance. If in doubt about the correct interpretation of
instructions, contact your nearest Customer Service Centre to get the necessary clarifications.

2 TARGET GROUP

This manual is aimed at operators and qualified technicians responsible for appliance maintenance.
Operators must not perform operations that should be carried out by qualified technicians.
The manufacturer cannot be held liable for damages resulting from failure to comply with this
prohibition.

3 STORING THE USE AND MAINTENANCE MANUAL

The Use and Maintenance Manual must be stored in its special pouch close to the appliance,
protected from liquids and anything else that could compromise its legibility.

4 ON DELIVERY OF THE APPLIANCE

When the machine is delivered to the customer, an immediate check must be performed to ensure
all the material mentioned in the shipping documents has been received, in addition to verifying
that the equipment has not been damaged during transportation. If this is the case, the carrier
must ascertain the extent of the damage at once, informing our customer service office . It is only
by prompt action of th is type that the missing material can be obtained, and compensation for
damage successfully claimed.

5 INTRODUCTORY COMMENT

Any type of equipment can only work properly and effectively if used correctly and kept in full
working order by performing the maintenance operations described in the attached documentation.
You should therefore read this instruction manual carefully , consulting it again if issues arise while
using the machine. If necessary, remember that our assistance service ( organized in collaboration
with our dealers) is always available for advice or direct intervention.

6 IDENTIFICATION DATA

For technical assistance or to request replacement parts, always give the model, the version and the
serial number (written on the relevant plate).

7 TECHNICAL DESCRIPTION

The machine is a scrubbing machine that cleans a wide range of flooring and dirt types by means of
the mechanical action of the discoidal brush and the chemical action of a water-detergent solution
. As it advances, it collects the dirt that has been removed and the detergent solution that has not
been absorbed by the floor. The appliance must only be used for this purpose .
EN
33