Symbols Used In The Manual; Symbols Used On The Appliance - Lavorwash FIT 35B Instrucciones Para El Uso

SYMBOLS USED IN THE MANUAL

Open book symbol:
Tells the operator to read the manual before
using the appliance.
Warning symbol:
Carefully read the sections marked with this
symbol and observe the indications, for the
safety of the operator and the appliance.
Covered place symbol:
The operations preceded by this symbol must
always be carried out in a dry, covered area .
Protective gloves symbol:
Always wear protective gloves, to avoid the risk
of serious injury to your hands.
Explosion risk symbol:
Indicates that the battery may explode in certain
conditions, if not handled in accordance with the
directives indicated in the manufacturer's
manual.
Tank drainage symbol:
Informs the operator that the recovery tank must
be emptied every time the solution tank is filled.
Tank Recycling symbol:
Carefully read the sections marked with this
symbol in order to fill the solution tank correctly.
Disposal symbol:
Carefully read the sections marked with this
symbol for disposing of the appliance.
32
SYMBOLS
Recycling symbol:
Informs the operator that the operations must
be carried out in accordance with the
environmental regulations in force in the place
where the appliance is being used.

SYMBOLS USED ON THE APPLIANCE

Main switch symbol:
Located on the rear part of the appliance. to
indicate the main switch.
Solenoid valve switch symbol:
Located on the rear part of the appliance, to
indicate the solenoid valve switch.
Lifting point symbol:
Indicates the location of the elements for lifting
the appliance or moving mobile appliance parts.
"OPEN" symbol:
Located on the upper part of the appliance, to
indicate the position of the handle for opening
the front carter
EN