Intended Use; Safety; Serial Number Plate; Technical Data - Lavorwash FIT 35B Instrucciones Para El Uso

This scrubbing machine was designed and built for the cleaning (scrubbing and drying) of smooth,
compact flooring in the commercial, residential and industrial sectors by a qualified operator in
proven safety conditions. The scrubbing machine is not suitable for cleaning rugs or carpets. The
appliance is only suitable for use in indoor or at least covered areas.
ATTENTION: the appliance is not suitable for use in the rain, or under jets of water.
IT IS FORBIDDEN to use the appliance for picking up dangerous dusts or in flammable liquids in
places with an explosive atmosphere. In addition, it is not suitable as a means of transport for
people or objects.
Operator cooperation is paramount for accident prevention. No accident prevention program can
be effective without the full co-operation of the operator who is directly responsible for machine
operation. The majority of occupational accidents that happen both in the workplace or whilst
moving are caused by failure to respect the most basic safety rules. An attentive, careful operator
is most effective guarantee against accidents and is fundamental in order to implement any
prevention program
The serial number plate is located rear case of machine body,which indicates the general appliance
characteristics (in particular, the serial number). The serial number is a very important piece of
information and should always be provided together with any request for assistance or when
purchasing spare parts
BATTERY SPECIFICATION
BRUSH POWER
VACUUM MOTOR
RUNNING TIME
CHARGING TIME
CLEAN WATER TANK
RECOVERY TANK
NOISE LEVEL
SWEEPING WIDTH
SQUEEGEE WIDTH
BRUSH SPEED
34

8 INTENDED USE

9 SAFETY

10 SERIAL NUMBER PLATE

11 TECHNICAL DATA

25.2V , 6400MAH
32W
70W
1 H
1.5H
1.9L
1.5L(ON THEORY)
70 DB(A)
350MM
422MM
350RPM
EN