How To Unpack The Appliance - Lavorwash FIT 35B Instrucciones Para El Uso

8) Do not place any liquid containers on the appliance.
9) In the event of a fi re, use a powder extinguisher. Do not use water.
10) Avoid using the brushes while the appliance is standing still, so as not to damage the fl oor.
11) Do not knock against shelving or scaff olding , where there is a danger of falling objects. The
operator must always be equipped with the appropriate safety devices ( gloves , shoes , helmet
goggles , etc.).
12) If the appliance does not work properly, check this is not caused by failure to carry out routine
maintenance. Otherwise , ask for intervention of the authorized technical assistance center .
13) If you need to replace any components, request the ORIGINAL spare parts from an Authorized
Retailer or dealer.
14) Restore all electrical connections after any maintenance interventions.
15) Have the appliance checked by an authorized technical assistance center every year.
16) When disposing of consumable materials, observe the laws and regulations in force. When,
after years of valuable work , your appliance needs to be fi nally decommissioned , dispose of
the materials contained in it appropriately, bearing in mind that the appliance is made of fully
recyclable materials.

14 HOW TO UNPACK THE APPLIANCE

The procedure for removing the device from its packaging is the following:
1. Place the lower part of the outer packaging in contact with the fl oor.
2. Open the outer box.
3. Remove the accessories from the box and carefully lay them on the ground.
4. Take the appliance out of the box.
ATTENTION: it is recommended that all the packaging components be kept for any future
transportation of the appliance. transportation of the appliance.
ATTENTION: these operations must be carried out using protective gloves to avoid any
possible contact with the edgesor tips of metal objects.
EN
37