At The End Of The Work - Lavorwash FIT 35B Instrucciones Para El Uso

ATTENTION: the joint on the device
guarantees greater manageability. To make
a left-hand tum, rotate the handle to the left
(Fig.4); rotate it to the right when you want
to tum right.
21 AT THE END OF THE
WORK
At the end of the work, and before carrying
out any type of maintenance, perform the
following operations:
1. Deactivate the appliance using the main
switch (1) (Fig.1).
2. Rotate the handlebar so it is vertical.
ATTENTION: during this operation, do
not rest your foot on the appliance.
3. set the machine in vertical position, press
with your thumb as shown in the fi gure,
press knob in position (2) (Fig. 2) until the
fl oor scrubber body is locked, in order to lift
the fl oor scrubber and release it from fl oor.
ATTENTION: Fig. 2 shows the Left side
of the device. Rotate the knob on the right
hand side in the opposite direction.
4. Take the appliance to the dedicated waste
water drainage area.
ATTENTION: The place given over to
this operation must comply with current
environment I protection regulations.
5. Remove the power battery (3) from the
appliance. To free the battery, shift the stop
lever (4) in the direction of the arrow(Fig.3).
48
2
2
EN