Trial Sewing; Sewing Test - JUKI MO-2800 Manual De Instrucciones

Trial sewing

25

Sewing test

Use two plies of material to check that the quality of the finished
seam and thread tensions are correct.
1. Close the looper cover. Turn the power on.
2. Check that the upper knife is raised.
3. Lower the presser foot.
4. While holding the thread trailing from the rear of the presser foot
by hand, depress the controller to produce chain-off thread by 6
to 7 cm.
5. Raise the front side of the presser foot with fingers and insert the
material under the presser foot until the upper knife is reached.
6. Start the sewing machine.
7. After the completion of sewing, produce chain-off thread by 5 to 6
cm.
8. Put the chain-off thread over the thread trimming blade for trim-
ming.
* Chain-off thread is stitch-formed thread with no material.