Mounting The Machine On The Tripod; Changing The Batteries Of The Line Laser - Orbitalum PS 4.5 Plus Traducción Del Manual De Instrucciones Original

PS 4.5 PLUS
8.1.3

Mounting the machine on the Tripod

The Tripod is not included in the scope of supply but also obtainable as accessory (see chap. 3.2, p. 43).
To mount the Portable tube saw on the Tripod:
X Mount the PS to the Tripod with 4 included Allen screws.
8.2

changing the batteries of the line laser

ATTeNTION!
1. Loosen the threaded pin M4x4 (3) (Code 445 001 003) of the laser holder by using Allen key SW2 to remove the laser from the
cover plate.
2. Unscrew the line laser and replace the batteries (4) (Pack with 10 button cells, 1.5 V = Code 790 142 124).
3. Screw the parts of the line laser together.
4. Place the line laser back onto the holder, align and retighten it using the threaded pin M4x4 (3).
3
[REV. 20200320] OC_PS_BA_790048761_00__INH-02_EN
It is not allowed to open, modify or to remove protective covers or housings except for line
laser battery change.
Transport and assembly
Orbitalum Tools GmbH D-78224 Singen www.orbitalum.com
eNGLISH
4
49