Selecting Speed Stages - Orbitalum PS 4.5 Plus Traducción Del Manual De Instrucciones Original

eNGLISH
Transport and assembly
3. Use the motor grip to swing the motor approx. 45° upwards in clockwise direction, until the saw blade reaches the cutting
position.
4. To adjust the saw blade position, turn the hand wheel (6) until the teeth of the saw blade reach approx. 1 – 2 mm into the
tube (see the diagram).
5. Swing the motor back to its original position using the motor grip.
6. Move the tube forward until reaching the desired point of separation and fix it by means of the clamping jaw turning handle.
8.8

Selecting speed stages

TUBe MATeRIAL
Stainless steel (material no. 1.40... – 1.45...)
with a wall thickness of 1 mm up to max. 3 mm
High-tech material
(nickel chrome molybdenum alloy)
IMPORTANT!
56
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
45°
SPeeD SeTTING
(STAGe)
5 – 7
2 – 5
Speed setting
Select low speed for large tube diameters and for thick-walled tubes.
Tube
6
SPINDLe SPeeD
(RPM)
114 – 165
42 – 114
Gear switch
[REV. 20200320] OC_PS_BA_790048761_00__INH-02_EN
PS 4.5 PLUS
Saw blade
GeAR SWITcH
(STAGe)
2
2