Mounting The Clamping Jaws To The Vice; Disassembling Clamping Jaws; Which Saw Position For Which Application - Orbitalum PS 4.5 Plus Traducción Del Manual De Instrucciones Original

eNGLISH
Transport and assembly
8.3

Mounting the clamping jaws to the vice

NOTe!
8.3.1

Disassembling clamping jaws

1. Detach 2 wing screws (1) sidewards of the vice.
2. Remove the clamping jaws and turn by 180°.
3. Fasten the clamping jaws with 2 wing screws.
1
8.4

Which saw position for which application?

NOTe!
1
2
50
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
The PS 4.5 Plus is equipped with rotatable clamping jaws. By rotating of the clamping jaws
it is possible to process small (< 45 mm/1.772") or large (> 45 mm/1.772") tube diameters
(see "Scope of application", chap. 4.2, p. 44). When delivery of the PS 4.5 Plus the clamp-
ing jaws are already mounted on the PS 4.5 Plus, so that it can be started with processing of
tubes > 45 mm/1.772".
1
Use the Portable tube saw PS for cutting tubes and elbows only.
The user will be the only person liable for damages caused by improper use.
180°
Saw position 1:
Cutting tubes
Saw position 2:
Cutting elbows
[REV. 20200320] OC_PS_BA_790048761_00__INH-02_EN
PS 4.5 PLUS