Cutting Elbows (Saw Position 2); Cutting Tubes Or Elbows In A Cramped Workplace; Altering The Swivel Radius - Orbitalum PS 4.5 Plus Traducción Del Manual De Instrucciones Original

eNGLISH
Operation
9.2

cutting elbows (saw position 2)

Further workflows remain the same as in chap. 9.1, p. 58.
9.3

Cutting tubes or elbows in a cramped workplace

9.3.1

Altering the swivel radius

1. Loosen the screw (1) using a Allen key (SW 5).
2. The motor may now be turned by 90°.
3. Tighten the screw (1).
The working procedure is the same as described in chap. 9.1, p. 58.
1
60
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
90°
[REV. 20200320] OC_PS_BA_790048761_00__INH-02_EN
PS 4.5 PLUS