Control Devices - Lavorwash SWL R 1300 Manual De Instrucciones

4.3.

CONTROL DEVICES

4.3.1. POSITION OF THE CONTROLS AND DESCRIPTION
As mentioned in para . 4 .1, the control devices are located at the operator seat (Figure 8) . Figure 12 displays the
description and position of the operator controls and a detailed description below .
1 Starter key
2 Engine regulator
3 Accelerator
4 Start and work lights selector
5 Brake
6 Parking Brake
7 Brush movement selector
8 Central brush control
9 Central brush action regulator
10 Side brush switch
11 Side brush speed regulator
12 Suction switch
13 Filter shaker switch
14 Waste container control
15 Container flap control
16 Indicator and hour meter
17 Fuel level indicator
4.3.2. STARTER KEY
Through the action on the key switch (Item 1 Figure 12) it is possible to start the engine and stop it (Figure
13) . It is also possible to remove the key .
4.3.3. ENGINE REGULATOR
The engine regulator control (Item 2 Figure 12) consists of a lever through which it is possible to adjust the
Figure 12
49