Side Brush; Important - Lavorwash SWL R 1300 Manual De Instrucciones

3.3.

SIDE BRUSH

The side brush is installed on the operator side, Item 1 Figure 3, acts as a conveyor of dust and debris, and is
designed primarily for the cleaning of edges, corners and profiles. It is possible to disengage each brush through
a dedicated command. It is available in different hardness and nature of the bristles, depending on the type of
material to be collected or the flooring.
On request, the additional side brush installed on the opposite side is installed .
IMPORTANT: Do not touch the side brush with your hands during rotation and do not
collect filamentary materials (wires, ropes, etc.)
3.4. CENTRAL BRUSH
The central brush Item 2 Figure 3 is the main part of the machine and allows the loading of dust and debris
into the waste container. It is available in different hardness and nature of the bristles, depending on the type
of material to be collected or the flooring. It is adjustable in height when worn.
IMPORTANT: Do not collect cords, wires, packing straps, sticks, etc. longer than 25 cm
because they could wrap around the central and side brush and then damage it.
3.5. DUST SEALS
The seals Item 3 Figure 3 surround the central brush and are very important for correct functioning of the
machine as they allow dust to be suctioned in; it is important to check its condition often .
3.6. SUCTION SYSTEM
The suction system (Item 4 Figure 1) allows collection of the finest debris and prevents the formation of dust
that can form by the action of the brushes .
3.7. FILTERING SYSTEM
The filtering system is obtained by means of a pocket filter Item 1 Figure 4 and traps the finest particles
that are suctioned in by the suction system and prevents dust from spreading into the outside environment .
A shaking system (Item 2 Figure 4) is used to release debris inside the waste container recleaning the filters.
Figure 3
Figure 4
44