4.2.
OPERATOR COMFORT
To ensure correct posture and the desired degree of comfort during use of the machine it is possible to adjust
the stroke of the seat, the inclination of the backrest and the armrests through, respectively, lever A, lever B
and wheel C, placed located each armrest, as shown in Figure 9 .
It is also possible to adjust the inclination of the steering wheel, using the dedicated lever (Item 1 Figure
10) .
For models equipped with a cab and roll bar only and to ensure the desired ventilation, it is also possible to
open the rear window using the appropriate lever (Item 1 Figure 11) . For models equipped with a cab, it is
also possible to open the side window by using the dedicated handle (Item 2 Figure 11) and sliding it on the
guides .
Figure 9
Figure 10
Figure 11
48