Chapter 5 - Permitted And Non-Permitted Conditions Of Use - Lavorwash SWL R 1300 Manual De Instrucciones

Opening beyond the limit of the filter cover is prevented by dedicated cables (Figure 26) . This avoids the danger
of damaging the cover itself as well as the persons around it .

CHAPTER 5 - PERMITTED AND NON-PERMITTED CONDITIONS OF USE

5.1. PERMITTED CONDITIONS OF USE
The motorsweeper was created to clean processing residues, dust, dirt in general, all flat, hard, not excessively
uneven surfaces such as: cement, asphalt, stoneware, ceramic, wood, sheet metal, marble, rubber or plastic
rugs in general, ashlar or smooth, synthetic or short pile fibre carpets.
The permitted conditions of use are as follows .
Minimum operating temperature:
Maximum operating temperature: +38°C (+100.4°F)
Maximum front and side slope: para. 3.10
ALWAYS USE SAFETY BELTS WHEN OPERATING THE MOTORSWEEPER.
IMPORTANT: Do not use and do not leave at rest with temperatures above +40°C
(+104°F).
-20°C
Refer to the engine manual for additional permitted conditions of use.
Figure 25
Figure 26
(-4°F)
54