Chapter 7 - Commissioning; Chapter 8 - Using The Machine - Lavorwash SWL R 1300 Manual De Instrucciones

CHECK THAT THE PROTECTIONS ARE PERFECTLY INTACT AND CORRECTLY ASSEMBLED;
IN CASE OF DEFECTS OR MISSING ELEMENTS DO NOT PROCEED WITH START-UP AND
IMMEDIATELY CONTACT THE DEALER OR THE PARENT COMPANY.

CHAPTER 7 - COMMISSIONING

7.1. CHECKS BEFORE FIRST START-UP
The motorsweeper is supplied ready for the first start-up by the user. Adjustments, inspections and functional
tests have already been performed by the Manufacturer .
Carefully check the hydraulic oil level in the dedicated tank (Figure 28) .
7.2. TRAINING OF OPERATORS
There is no need for specific training of the operator with regard to the first start-up of the motorsweeper, except
for the information contained in this manual and, in that, relating to the engine .
7.3. FIRST START-UP
The first start-up of the motorsweeper is carried out in the same manner as described in paragraph 8.3.

CHAPTER 8 - USING THE MACHINE

8.1. CORRECT USE AND TIPS
ALWAYS USE SAFETY BELTS WHEN OPERATING THE MOTORSWEEPER.
NEVER TOUCH THE SIDE BRUSH WITH YOUR HANDS DURING ROTATION
BEFORE PROCEEDING, IT IS NECESSARY TO HAVE READ ALL THE
PREVIOUS CHAPTERS.
Read the engine instruction booklet carefully, but in any case:
1 - Check the engine oil level. If it is low top up.
2 - Check the water level in the radiator.
3 - Check the fuel level. If it is low top up.
All these operations must be carried out with the engine off and cold.
BEFORE PROCEEDING, IT IS NECESSARY TO HAVE READ ALL THE
PREVIOUS CHAPTERS.
Figure 28
56