Reading The Indicator Light - Devolo Giga Bridge Manual

2.4.1Reading the indicator light

The integrated LED indicates the status of the
Giga Bridge with flashing and lighting behaviour:
G.hn Flashing behav-
LED iour
1 Red LED Lights up for up to
5 seconds.
2 Red LED Flashes at inter-
vals
0.5 seconds. (On/
off)
Meaning
Start-up process
Status 1:
of The adapter reset was successful. The
reset button has been pressed and held
for 10 seconds.
Status 2:
The adapter is (back) in factory default
condition. Since the last reset, no pairing
with another Giga Bridge adapter has
taken place.
Connect the adapter to a different
Giga Bridge adapter as a full-fledged
G.hn network, as described in Chapter
3.3 Pairing – Establishing a G.hn con-
nection.
Introduction 16
LED status display
(web interface*)
Cannot be disabled
Cannot be disabled
devolo Giga Bridge