Expanding Your Internal Home Network; New Giga Bridge Network - Devolo Giga Bridge Manual

Connect the Giga Bridge adapter using the
2
provided network cable to the WAN (Wide
Area Network) port of the router.
Connect the Giga Bridge adapter using the F-
3
type connection (coaxial cable) to an existing
connection.
Set-up of the Giga Bridge is completed. The
fibre-optic Internet connection is forward-
ed from the ONT to the router.
3.5 Expanding your internal home
network
With Giga Bridge adapters, you can also expand
your internal home network:
CAUTION! Damage to telephone, DSL
and/or TV services when connected to
non-cleared lines
Only use the device on cleared—exclusively
available—telephone or coaxial cables
CAUTION! Tripping hazard
Lay the cable in a barrier-free manner and
ensure that the electrical socket and the
connected network devices are easily ac-
cessible

3.5.1 New Giga Bridge network

Connect the first Giga Bridge adapter to an
1
available power socket next to the router in the
living room.
Connect the adapter of the Giga Bridge using
2
the provided network cable with the network
jack of the router.
Connect the Giga Bridge adapter using a coax-
3
ial (F-type connection) or telephone line (G.hn
phone line socket, phone) to an existing con-
nection.
Connect the second Giga Bridge adapter to a
4
free power socket at the desired location of
use.
Connect the Giga Bridge adapter using a coax-
5
ial (F-type connection) or telephone line (G.hn
phone line socket, phone) to an existing con-
nection.
Connect the adapter of the Giga Bridge using
6
the provided network cable with the Ethernet
port of the desired device.
The connection between the adapters of
the Giga Bridge is complete. The data con-
nection is forwarded from the router to the
Giga Bridge adapters.
Initial use 28
devolo Giga Bridge