Devolo Giga Bridge Manual página 85

4.3.1G.hn
In the G.hn area, you will find functions and infor-
mation on the topic of G.hn and adapter pairing.
In order to use a new Giga Bridge adapter in your
network, first you have to connect it to your exist-
ing Giga Bridge adapters device as a network. This
is accomplished by using a shared password. This
can be assigned in different ways:
Using the G.hn/Reset button (see Chapter
b
3.3.2 Manual pairing)
or
Using the web interface, in the G.hn menu; as
b
described below:
Pairing – Using the button
Start the pairing operation by clicking on Start
1
pairing. This may take some time.
As soon as the new Giga Bridge adapter is inte-
2
grated into your existing network, it appears in
a list of available and established connections
(see Chapter Connections).
The new Giga Bridge adapter is integrated
in the existing Giga Bridge network and
can be used.
Pairing – Using custom password
You can also assign your network a custom G.hn
password that you pick yourself. Enter this pass-
word for each Giga Bridge adapter in the G.hn
password field and confirm your entry by clicking
on the Disk icon.
Note that the custom password is not assigned
to the whole network automatically. Instead,
you must assign it separately to each of your
Giga Bridge adapters.
Configuration 36
devolo Giga Bridge