Devolo Giga Bridge Manual página 66

17 Introduction
G.hn
LED
3 Red LED
4 White
LED
devolo Giga Bridge
Flashing behav- Meaning
iour
Status 1:
Lights up steady
The other network nodes are in standby
mode and cannot currently be accessed
over the mains supply. The LEDs of the
other Giga Bridge adapters flash white
only for a short time.
Status 2:
The connection to the other network
nodes has been interrupted. The remote
station may have been removed or
there is a malfunction in the connection.
Status 1: Status 1:
Flashes at inter- This Giga Bridge adapter is in pairing
vals of 0.5 second mode and the system is searching for
(On/off) new Giga Bridge adapters.
Status 2: Status 2:
Flashes at inter- Someone triggered the "Identify device"
vals of 1 second function on the web interface. This func-
(on/off) tion identifies the Giga Bridge adapter
being sought.
LED status display
(web interface*)
Can be disabled
Cannot be disabled