Wiring The Giga Bridge To The Router - Devolo Giga Bridge Manual

3.4.3Wiring the Giga Bridge to the
router
Once the first Giga Bridge adapter has been
connected to the NT/ONT, the next step is to
connect the second Giga Bridge adapter to the
router in the living space. After the adapter is
Wiring using a telephone line
The connection of the Giga Bridge using the
telephone cable is hassle-free. If an unused
telephone socket (TAE socket, Telecommunication
Adapter Equipment) and an old telephone
connection cable are available, e.g. a grey DSL
cable, it can be connected easily to the G.hn phone
jack of the Giga Bridge. The DSL cable uses the
plugged into an available
depending on the type of cabling selected, it is
connected using a coaxial or telephone cable. For
this purpose, the corresponding cable has to be
connected to the socket provided for this.
same wire pair assignment as the Giga Bridge, so
that no further steps are necessary:
Pin 4/5
Connect the second Giga Bridge adapter to a
1
free power socket next to the router.
Connect the Giga Bridge adapter using the
2
provided network cable to the WAN (Wide
Area Network) port of the router.
Initial use 26
power socket,
devolo Giga Bridge