Maintenance; Engine; Cleaning Or Replacing Engine Air Filtering Elements - Wetrok Speedmatic Zyklon Instrucciones De Manejo

Maintenance

FIG 6

Engine

Comply carefully with the instructions provided in the use and mainte-
nance manual of the engine. Whenever the sweeper is used, check the
engine oil level using the dip-stick 1 (fig.6) Change the engine oil every
100 working hours using the drain line 2 and cartridge 3 (fig.6).
Replace the fuel filter 4 (fig.6), every 500 working hours.
Check the motor coolant through the plug 5 fig.6 every 40 hours.
!
Warning!: When the engine is new, change the oil after the
first 20 working hours.
FIG 7a

Cleaning or replacing engine air filtering elements

Every 8 hours the sweeper is used, inspect the filtering elements 6
(fig.7a) to make sure they are in good working condition to prevent
carburettor malfunctions. Every 50 working hours clean the filtering
elements .
!
Warning!: Clean the filtering elements by means of an air jet
more often if the sweeper is used in very dusty zones.
NOTE:
read the instructions on the plate 'B' (fig.7a) on the filterholder lid.
39