Franklin Electric SUBDRIVE CONNECT Manual Del Usuario página 13

UNPACKING AND INSPECTION
Transportation and Storage
NOTICE
Risk of damage to VFD or other equipment.
• Do not stack drive boxes higher than standard 48" cube height when palleting for storage.
• Do not place heavy items on VFD.
• Do not drop VFD or subject it to hard impact.
• Dispose of VFD properly as industrial equipment waste.
The VFD should be stored in the shipping carton or crate before installation.
Unpacking
CAUTION
Risk of personal injury or damage to VFD or other equipment.
• Use suitable lifting equipment, in good condition, rated for at least 5 times the weight of
the drive.
1. Inspect exterior of package for shipping damage. If there is damage, notify the shipping agent and
your sales representative.
2. Make sure the part number and product ratings on the identification label are correct for the
application.
3. Remove drive from the box and check for damage.
4. Remove the drive cover and make sure the product ratings on the nameplate match the package
label.
What's In The Box
1. Variable Frequency Drive (VFD)
2. Pressure Transducer
3. Transducer Cable
4. Screwdriver/Adjustment Tool
5. Strain Relief Fitting
6. Owner's Manual
UNPACKING AND INSPECTION
Transportation and Storage
13