Franklin Electric SUBDRIVE CONNECT Manual Del Usuario página 43

COMMUNICATIONS
FE Connect Mobile Application
The FE Connect Mobile App is an intuitive way to wirelessly configure and control
your VFD. It provides features such as:
• Simple drive setup for quick and easy startup
• Advanced feature programming available only through the app
• Real-time system performance monitoring
• Fault and Change history time and date logging
• Email system logs directly to FE support
• Wireless drive firmware updates from your phone
In your mobile device's app store, search for FE Connect and install the app.
Setup Wi-Fi Connection
After installing the FE Connect app on your mobile device, use the following procedure to connect to a
SubDrive Connect.
NOTE: The SubDrive Connect broadcasts a Wi-Fi signal for 15 minutes after being powered on. If the
drive has been powered longer than 15 minutes, power must be cycled off and back on in order to re-
start the signal.
After the drive has been powered on, the FE Connect light will shine continuously to show that a connec-
tion is available. If the light is flashing, a previously-connected device is within range of the drive and is
trying to connect. Only one device can be connected at a time.
1. Open the Wi-Fi connection settings on the mobile device while
the FE Connect light is on.
2. In the list of available connections, select the hotspot named
FECNCT_XXXXX.
• XXXXX will be the end of the drive serial number.
• The light will flash while the connection is being made.
NOTE: The Wi-Fi connection will stay active for an unlimited time, as long as the
mobile device is not disconnected. If the connection is broken, the drive Wi-Fi will
be available for reconnection for one hour. After that time, the drive power must
be cycled in order to reconnect.
COMMUNICATIONS
FE Connect Mobile Application
43