Franklin Electric SUBDRIVE CONNECT Manual Del Usuario página 57

SPECIFICATIONS
SubDrive 15 Connect/SubDrive 20 Connect
NEMA 3R
Model
(indoor/outdoor)
Voltage
Phase In
Frequency
Current (max)
Input from
Power Source
Power Factor
Power (idle)
Power (max)
Wire Gauge Size(s)
Voltage
Phase Out
Frequency Range
Output to
Motor
Current (max)
Wire Gauge Size(s)
Factory Preset
Pressure
Setting
Adjustment Range
Temperature
Operating
(at 230 VAC input)
Conditions*
Relative Humidity
Temperature
Storage**
Shelf Life
Dimensions
NEMA 3R
and Weight
* Operating temperature is specified at full output power when installed as recommended. Refer to
"Over Temperature Foldback" on page
** Shelf life can be extended for one year by powering the drive for 60 minutes with no load.
SubDrive 15
5870205103C
12 A
4 Watts
2.5 kW
Refer to "Input (Power) Wire and Fuse Sizing" on page
Single-Phase (3–wire) OR Three-Phase
30-78 Hz: 1/2-rated pump (3-Phase)
30-70 Hz: 2/3 or 3/4-rated pump (3-
Phase)
30-60 Hz: Matched pump (3-Phase)
30-63 Hz (Single-Phase Motors)
5.9 A (three-phase)
10.4 A (single-phase 3–wire)
Refer to
Transducer: 5-95 psi (0.3-6.6 bar)
Pressure Sensor: 25-80 psi (1.7-5.5 bar)
–13 °F to 122 °F (–25 °C to 50 °C)
–13 °F to 149 °F (–25 °C to 65 °C)
9-3/4" x 19-3/4" x 5-1/4" : 26 lbs
(25 x 50 x 13 cm) : (11.8 kg)
38.
SubDrive 15 Connect/SubDrive 20 Connect
208/230 ± 10% VAC
Single-Phase
60/50 Hz
~ 0.95
272 VAC Maximum
30-78 Hz: 1/2-rated pump (3-Phase)
30-70 Hz: 2/3 or 3/4-rated pump (3-Phase)
30-60 Hz: Matched pump (3-Phase)
30-63 Hz (Single-Phase Motors)
60-156Hz: 1/2-rated pump (MagForce)
60-156Hz: 2/3 or 3/4-rated pump
(MagForce)
60-120Hz: Matched pump (MagForce)
8.1 A (three-phase)
13.2 A (single-phase 3-wire)
"Output (Motor) Wire Sizing" on page
50 psi (3.4 bar)
20-95%, non-condensing
1.5 Years
9.75" x 16.9" x 5-1/4" : 19 lbs
(25 x 43 x 13 cm) : (8.6 kg)
SPECIFICATIONS
SubDrive 20
5870205313C
17.3 A
5 Watts
4.2 kW
24.
24.
57