Cleaning instructions
Note: Never expose the MalleoLoc® to direct heat (e.g. heaters, sunlight, in
your car etc.)! This may damage the material. This can impair the
effectiveness of the MalleoLoc®.
For cleaning, remove the straps from the MalleoLoc®.
MalleoLoc® shell
To avoid damage to the product, wipe the shell of the MalleoLoc® with a mild
detergent only.
MalleoLoc® straps
Close the velcro fastening to avoid damaging the product. Wash the straps
separately in a laundry net, using a mild detergent, in the 30 °C "Delicates"
cycle. Spin the straps at a maximum of 500 r.p.m.
3
Delicates
Maintenance instructions
If handled and cared for correctly, the product is practically maintenance-
free.
Assembly and fitting instructions
The MalleoLoc® is supplied ready for use.
Assembling the MalleoLoc® after cleaning:
Fitting the loop:
Hold the loop with the tip pointing downwards and the Bauerfeind logo
I
"B" forwards between thumb and forefinger. Now guide the strap with the
light gray broad side through the loop from the front.
Fitting the straps:
Place the long strap that you have just fitted with the loop in front of you,
with the dark gray side upwards.
from the outside inwards, through the lower (closed) part of the MalleoLoc®
shell.
Now guide the short strap with the dark gray side pointing upwards from
III
the inside outwards, through the open part of the MalleoLoc® shell.
Technical specifications / parameters, accessories
10
The MalleoLoc® is an orthotic support for the ankle with two straps attached
to it. The straps are removable. In addition, a loop for fastening is fitted to
the lower (longer) strap.
The two straps and the loop are available as spare parts.
Do not bleach
Do not tumble-dry
Guide the strap with the narrow side
II
Do not iron
Do not dry
clean