Checchi & Magli BABY TRIUM Manual De Uso Y Mantenimiento página 64

Adjusting the the small wheel scraper
Proceed as outlined below.
1) Loosen the screws (A).
2) Position the scraper (B) so that it is just touching the
packing wheel.
3) Tighten the screws (A).
Adjusting the skid load
The skid is recommended for use of the prime mover on
spongy or sandy soil.
Proceed as outlined below.
1) Turn the knob (A) clockwise to increase the skid (B)
load on the ground.
Turn the knob (A) anticlockwise to decrease the skid
(B) load on the ground.
Decide whether the clearance of pipe (C) needs ad-
justing with screw (D).
Adjusting the skid inclination
Proceed as outlined below.
1) Loosen nuts (A) and (C).
2) Alternately loosen and tighten the screws (B) and (D)
to tilt the skid by the amount shown.
3) Tighten nuts (A) and (C).
English language
ADJUSTMENT INFORMATION
UN41 0179MG
UN41-0284GI
UN41-0277GI
20
B A
B
C
D
Use and maintenance
5