Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance advice
Maintenance work must be carried out with the work
vehicle on flat, compact ground, with the tractor en-
gine off, parking brake engaged, and ignition key re-
moved, and adopting all the necessary safety meas-
ures required to work safely.
Any maintenance operations that can be carried out
on the business premises come under the ordinary
Maintenance intervals schedule
To guarantee constant, efficient and safe machine operation, ensure all the maintenance envisaged by the manufac-
turer is carried out.
Maintenance schedule
Frequency
Component
Dispenser
Every hour
Ploughshare
Lift frame
Every day
Safety devices
Warning and hazard plates
Machine components
Every 50 hours
Nuts and bolts
Every 150 hours
Tyres
ßCleaning the ploughshare
Clean the ploughshare to remove any debris, mud, peat, plant residues etc that may have built up during use.
Lack of cleaning will limit the ejector range, therefore, as well as affecting the machine's operation, it also
causes serious mechanical damage.
B
UN41 0280GI
Proceed as outlined below.
1) Lift the work vehicle off the ground.
2) Move the lever (A) and turn the guide (B) downwards,
if fitted.
3) Loosen the wing nut (C).
4) Turn the lock lever (D).
5) Push the ploughshare forwards and turn it so it is fac-
ing downwards.
English language
MAINTENANCE INFORMATION
maintenance envisaged in the instruction manual.
Special maintenance operations (non included in
this handbook) require a specialised workshop on
the premises which meets the requirements speci-
fied by the relative laws in force (appropriate equip-
ment suitably trained staff etc.); if you do not have a
compliant workshop, contact an authorised one.
Maintenance intervals
Type of work
Cleaning
Cleaning
Inspection
Inspection
Inspection
Greasing
Tightening
Pressure check
A
D
C
6) Clean the ploughshare with the tool provided (E).
7) Once the cleaning is complete, replace the plough-
share in the working position and check that the lock
lever (D) is holding it in position.
8) Tighten the wing nut (C).
9) Turn the guide (if fitted) downwards and secure it in
position with lever (A).
31
Manual reference
Cleaning the ploughshare
Guards
Information and safety signs
Lubrication points diagram
Tyres check
E
Use and maintenance
7
Publicidad
