Nederman VAC 12/20 Manual De Instrucciones página 34

EN VAC 12/20
Appendix B: Service protocol
Copy the service protocol, fill it in and save it as a service record.
For values, note the value in the result column, otherwise a tick will suffice if the item
has been performed or considered.
NOTE!
rectified before starting normal operation again.
Unit No.
Description
Connections
Corrosion/damage
Ventilation
Belt tension
Belt replace
Pulley replace
Temperature control function
Start-up valve function
Flow restrictor function
Flow restrictor oil level
Fan bearings temperature
Fan bearings replace
Motor bearings grease
Motor bearings replace
Motor replace
Optional: Anti surge control
34
If a value is outside the limit or a result is incorrect or missing, this must be
Date:
Operating hours:
Performed by:
Reference
'9.1 General inspection'
'9.1 General inspection'
'9.1 General inspection'
'9.2 Belt transmission'
'9.2 Belt transmission'
'9.2 Belt transmission'
'9.3 VAC 20: Temperature control'
'9.4 Start-up valve'
'9.5 Flow restrictor FR 160'
'9.5.2 Flow restrictor oil'
'9.6 Fan bearings temperature'
'9.7 Fan bearings'
'9.8 Motor bearings'
'9.8 Motor bearings'
'9.8 Motor bearings'
'5.8 Optional: Anti surge control'
Result Notes