Specialized KENEVO SL Manual Del Usuario página 18

8 . 3 . HA N D L E BAR REMOTE
8.3
Fig. 8.3
The TCU handlebar remote is included on some Kenevo SL models and controls the level of
motor support.
A: (+)(-) Support adjustment buttons
„
B: Function Buttons, pressing and holding the lower function button activates the walk
„
assist mode.
C: Compression Screw (2 mm Hex key at 0.8 Nm / 7 in-lbf).
„
8 .4. RE MOTE FUN CT I ONS
8.4
Fig. 8.4
A - F1 BUTTON:
„
• Toggles pages on the MasterMind TCU.
• Settings & Menu navigating.
B - F2 BUTTON:
„
• Pressing and holding activates the walk-assist mode. This provides motor assist at 6
km/h / 3.7 mph to help push the bicycle uphill when walking.
• Settings & Menu navigating.
C - (+) BUTTON:
„
• Short press increases the amount of support.
• Long press toggles standard modes and Micro Tune mode.
D - (-) BUTTON:
„
• Short press decreases the amount of support.
• * Long press resets all the ride data including trip, timer, calories, elevation, etc.
C&D - (-+) DUAL BUTTON PRESS:
„
• Long dual press opens the settings menu on the MasterMind TCU.
* Long press (-), which resets all ride data, should be performed after each ride.
16