Publicidad
Idiomas disponibles
Idiomas disponibles
MASTERMIND TCU DISPLAY
MOTOR MOUNTS DRIVE SIDE
MOTOR MOUNTS NON DRIVE SIDE
ROCK GUARD BOLT
SEAT STAY MUD GUARD
SPEED SENSOR MOUNT BOLT
SPEED SENSOR MAGNET (6 BOLT VERSION)
REMOTE
REAR BRAKE GUIDE BOLT
CHARGE PORT SCREWS
The seat collar torque spec can vary depending on the seatpost or seatpost/shim
1
combination. Certain dropper seatposts can be very sensitive to torque. Too low
torque can cause seatpost slip, too high torque can cause the mechanism to bind as
the saddle is raised or lowered. The seat collar baseline torque spec is 5.1 Nm /45
in-lbf, but can be raised or lowered slightly (4.0-6.2 Nm / 35-55 in-lbf) as required by
the seatpost. Follow the seat post's recommended applied torque if available, and do
not exceed 6.2 Nm / 55 in-lbf.
Apply threadlocker to all chainring bolts.
2
T10 TORX
0.8
7
5 mm HEX
17
150
T30 TORX
10
90
4 mm HEX
8.6
75
T25 TORX
0.8
7
3 mm HEX
1
9
T25 TORX
6.2
55
2 mm HEX
0.8
7
3 mm HEX
0.8
7
T8 TORX
NA
NA
30
Publicidad
