Publicidad
Idiomas disponibles
Idiomas disponibles
Before using the machine, guard I (PICT. 9) must be fully
lowered. For mixers with tilting head, you must check that the
bowl is correctly inserted and locked in the disc and the head
has been lowered and locked by the control pin M.
CONTROL DEVICES
FIG. 5
COMANDO
A) ON button
B) OFF button
F) Timer
pos. 0
pos. 1
pos. 2
Functional check before start:
Once the power cable plug has been inserted into the mains socket, the machine is ready for the functional check.
-
Before starting the machine, make sure that all guards are correctly installed.
-
When starting for the first time, check that the spiral and the bowl rotate clockwise. If this is not the case,
invert the arrangement of the phases.
7
AT
B
FIG. 6
ON-OFF BUTTON (FIG. 5)
Enables (1) the movement of rotating parts.
Stops (0) the movement of rotating parts.
Allows the machine to start and allows the time to be set
SPEED SELECTOR (FIG 6)
Stops the movement of rotating parts.
Activates the movement of rotating parts at 1st speed.
Activates the movement of rotating parts at 2nd speed.
FIG. 7
AZIONE
TIMER (FIG. 7)
working
POSITION
Machine side
Machine side
Machine side
Machine side
Machine side
Machine side
Publicidad
