7.3
Overheat protection ______________________________________________________________ 18
7.4
BUILT-IN Temperature overload sensor defective _________________________________________ 18
7.5
Battery-low signal _______________________________________________________________ 18
8
Cleaning, disinfection and sterilisation _________________________________________________ 19
8.1
Disassembly ____________________________________________________________________ 19
8.2
LIGHT GUIDE – Cleaning and disinfection _______________________________________________ 19
8.2.1
LIGHT GUIDE – Inspection before the sterilisation _________________________________________ 19
8.3
PROTECTIVE LIGHT CONE – Cleaning and disinfection _____________________________________ 19
8.3.1
PROTECTIVE LIGHT CONE – Inspection before the sterilisation ________________________________ 19
8.4
LIGHT GUIDE and PROTECTIVE LIGHT CONE – Packaging before the sterilisation __________________ 20
8.4.1
LIGHT GUIDE and PROTECTIVE LIGHT CONE – Sterilisation __________________________________ 20
8.4.1.1 Sterilisation method ______________________________________________________________ 20
8.4.1.2 Sterilisation parameters ___________________________________________________________ 20
8.5
HAND PIECE – Cleaning and disinfection _______________________________________________ 20
8.5.1
Cleaning Mode __________________________________________________________________ 20
8.5.2
Cleaning and disinfection __________________________________________________________ 21
8.6
CHARGING UNIT – Cleaning Casing ___________________________________________________ 22
GB
8.6.1
CHARGING UNIT – Cleaning charging contacts ____________________________________________ 22
8.6.2
CHARGING UNIT – Replaceable charging contacts ________________________________________ 22
- 2 -
9
Shelf storage _____________________________________________________________________ 22
10
Disposal _________________________________________________________________________ 22
11
Troubleshooting ___________________________________________________________________ 23
12
Technical specifications _____________________________________________________________ 26
12.1
Electromagnetic compatibility EN 60601-1-2 ____________________________________________ 27
12.2
Charging unit identification plate _____________________________________________________ 33
12.3
Hand piece identification data _______________________________________________________ 33
13
Warranty ________________________________________________________________________ 33
14
Service __________________________________________________________________________ 34
15
Document history __________________________________________________________________ 34
NOTE
Please use the book icon to find the chapter images
or further information on the fold-out cover.
1x / 2x
Please
fold-out front
fold-out rear
cover
Please
cover