MSA ALTAIR 5X Manual De Uso página 12

3 Description
Icon Alarm
Operating Beep
3.4 On-Screen Indicators
Monochrome Display
Figure 2 Monochrome Display
1 Gas Type
2 Current Time
3 "Soft Key" ▼ Indicator 7
4 Gas Reading
On a monochrome display, a message appears every 30 seconds if the Vibration, Horn or LED alarms are turned OFF.
12
This operating beep activates every 30 seconds by momentarily beeping the horn and
flashing the alarm LEDs under the following conditions:
• Operating beep is enabled
• Device is on normal Measure Gases page
• Device is not in battery warning
• Device is not in gas alarm.
The Operating Beep can be disabled using the SETUP - INSTRUMENT OPTIONS (→
4.5 Device Setup) or through MSA Link software.
5 Battery Condition
6 Successful Bump Test/Calibration Indicator
"Soft Key" ▲ Indicator
8 + MotionAlert (+ = ON)
♥ Sensor Life Indicator
Bluetooth ON/OFF
ALTAIR 5X / ALTAIR 5X IR US