MSA ALTAIR 5X Manual De Uso página 29

NOTE: The device goes to the next Setup Page.
Setting Datalog Intervals
This option is for setting the intervals at which all the readings will be logged.
1. Press the ■ button to enter setup.
2. Change interval by pressing the▼ or ▲ button.
3. Confirm with the ■ button.
NOTE: The device goes to the next Setup Page.
Setting Stealth Mode
Stealth mode disables the visual, audible and vibrating alarms.
1. Press the ■ button to change mode (ON/OFF).
2. Press the ▼ button to go to the next page or the ▲ button to return to previous page.
Setting Operating Beep
1. Press the ■ button to change mode (ON/OFF).
2. Press the ▼ button to go to the next page or the ▲ button to return to previous page.
Setting Display Contrast (monochrome display)
1. Press ▼ or ▲ button to adjust the contrast level.
2. Press ■ button to confirm the contrast level.
Setting Backlight
1. Press the ■ button to enter setup.
NOTE: Change option by pressing the ▼ or ▲ button.
2. Press the ■ button to enter.
3. Change timeout by pressing the ▼ or ▲ button.
4. Press ■ button to confirm timeout.
Setting Bluetooth
1. Press the ■ button to change mode (ON/OFF).
2. Press the ▼ button to go to the next page or the ▼ button to return to previous page.
Back To Main Menu
There are three options at this point:
the ▼button Sensor Options menu
Previous Setup page in the Instrument Options
the ▲ button
menu
the ■ button Instrument Options menu
4.6 Bluetooth Operation
NOTE: Versions of this product manufactured July 2022 and later may not contain Bluetooth wireless technology. This will
be indicated by the front case of the detector not utilizing a Bluetooth logo. All references in this manual to Bluetooth will not
pertain to these version of the device.
Bluetooth must be enabled for any Bluetooth functions to operate
appropriate software is required for proper operation.
Bluetooth security
US
(→4.5 Device
ALTAIR 5X / ALTAIR 5X IR
Setup). Compatible Bluetooth host with
4 Operation
29