MSA ALTAIR 5X Manual De Uso página 26

4 Operation
The Alarm Options Menu allows the user to:
• Enable/disable the vibrating alarm
• Enable/disable the audible alarm (horn)
• Enable/disable the Alarm LEDs
• Enable/disable the MOTIONALERT SELECTION page.
NOTE: If disabled, the user cannot change the device MotionAlert setting.
• Set Sensor Alarms.
Press
• The ▼ button go to next page
• The ▲ button to go previous page
• The ■ button to enter setup.
Setting Vibrating Alarm
Press the ■ button to enable/disable this option.
Setting Horn Alarm
Press ■ button to enable/disable this option.
Setting LED Alarm
Press ■ button to enable/disable this option.
Setting MotionAlert Access
Setting this parameter allows the user to access the MOTIONALERT page from the MEASURE page.
If access is denied here:
• the user cannot access the MOTIONALERT page to enable or disable that feature
• the InstantAlert feature
1. To grant or deny user access to the MOTIONALERT page, use the button to change the indicated selection.
○ User access is:
▪ permitted when the setting indicates ON.
▪ denied when the setting indicates OFF.
2. The selection is confirmed by pressing either the ▼ or ▲ button.
Setting Sensor Alarms
This page allows modifying the preset alarm values of:
• LOW Alarm
• HIGH Alarm
• STEL Alarm
• TWA Alarm
NOTE: Factory set alarm levels are shown in
1. Press the ■ button to enter Sensor Alarm setup.
NOTE: LOW Alarm Setup screen displays.
26
(3.3 Alarms) cannot be activated.
6.1 Factory-set Alarm Thresholds and
ALTAIR 5X / ALTAIR 5X IR
Setpoints.
US