Yamaha RX-V863 Guia De Inicio Rapido página 104

Remote control features
■ Clearing a learned function
You can clear the function learned for a certain button in
each control area.
Set the operation mode selector to F AMP or
1
F SOURCE and then press an input selector
button ( 5 ) to select the control area
containing the function you want to clear.
The selected component name appears in the display
window ( 6 ).
AMP
SOURCE
TV
or
AMP
SOURCE
TV
Press C LEARN using a ballpoint pen or
2
similar object.
"LEARN" and the selected component name
(e.g. "DVD") appear alternately in the display
window ( 6 ).
LEARN
Notes
• Do not press and hold C LEARN. If you hold it down for
more than 3 seconds, the remote control enters the remote
control code setting mode.
• If you do not complete each of the following steps within
30 seconds, the learning mode will be automatically
canceled. In this case, start over from step 2.
102
En
TUNER A B C
V - AUX/DOCK DTV/CBL CD MD/CD-R
DVD DVR VCR PHONO
Press and hold C CLEAR using a ballpoint
3
pen or similar object and then press the
button you want to clear for about 3 seconds.
"C;OK" appears in the display window ( 6 ) if
clearing was successful. Once "C;OK" appears in the
display window ( 6 ) on the remote control, release
the ballpoint pen or similar object used to press
C CLEAR to exit the clearing mode. The remote
control returns to the learning mode.
MODE- PTY SEEK- START
LEARN CLEAR RENAME
y
• If you continuously want to clear another function, repeat
step 3.
• If you continuously want to clear another function for
another component, press 6 SELECT k / n to select the
control area, then repeat step 3.
• Once you clear a learned function, the button reverts to the
factory setting (or to the manufacturer setting if you have
set remote control codes).
Press C LEARN again to exit.
4
Notes
• "C;NG" appears in the display window ( 6 ) on the remote
control if clearing was unsuccessful. In this case, start over from
step 2.
• "ERROR" appears in the display window ( 6 ) on the remote
control if you press more than one button simultaneously.