Yamaha RX-V863 Guia De Inicio Rapido página 39

This unit is equipped with 17 preset SCENE templates for
various situations of using this unit. As the initial factory
setting, the following SCENE templates are assigned to
each SCENE button (see page 8):
SCENE 1: DVD Movie Viewing
SCENE 2: Music Disc Listening
SCENE 3: TV Viewing
SCENE 4: Radio Listening
If you want to use other SCENE templates, you can select
the desired SCENE templates from the SCENE template
library and assign the templates to the selected SCENE
buttons on the front panel and the remote control.
Select the desired SCENE
template
SCENE template library
(Image)
Selecting the desired SCENE
template to the SCENE buttons
Press and hold the S SCENE (or 4 SCENE)
1
button for 3 seconds.
The indicator on the selected SCENE button on the
front panel starts to flash, and the name of the
currently assigned SCENE template appears in the
front panel display.
3 seconds
or
1
Front panel
Flashes
DVD Movie View
Selecting the SCENE templates
1
Assign the
SCENE
template to the
SCENE button
3 seconds
1 1
Remote control
1
SELECTING THE SCENE TEMPLATES
Rotate the R INPUT selector (or set the
2
operation mode selector to F AMP and then
press 9 l / h) to select the desired
template.
DVD Viewing
Press the S SCENE (or 4 SCENE) button
3
again to confirm the selection.
The selected SCENE template is assigned to the
SCENE button.
or
1
Front panel
Note
Once the desired SCENE templates are assigned to the
corresponding SCENE buttons, you need to set the input
source of the SCENE template on the remote control. See
page 41 for details.
1
Remote control
37
En