Publicidad
Idiomas disponibles
Idiomas disponibles
Customizing this unit (MANUAL SETUP)
Input menu 4 INPUT MENU
Note
Some parameters described below may not be available for all input sources and some parameters are only available for specific input
sources.
Parameter
I/O ASSIGNMENT
INPUT RENAME
VOL. TRIM
DECODER MODE
STANDBY CHARGE
START PAIRING
BGV
INPUT CH
FRONT
Option menu 5 OPTION MENU
Menu
A)DISPLAY SET
B)VIDEO SET
C)MEMORY GUARD
74
En
Assigns the input/output jacks according to the component to be used if the initial settings of
this unit do not correspond to your needs.
Changes the name of the input source that appears in the OSD and in the front panel display.
Adjusts the level of the signal input at each jack.
Switches the decoder activation mode. You can designate the reassigned digital input jacks for
DTS signals.
Selects whether this unit charges the battery of the stationed iPod or not when this unit is in the
standby mode (see page 29).
Pair the connected Yamaha Bluetooth adapter (such as YBA-10, sold separately) with a
Bluetooth component (see page 62).
Selects the video source played back in the background of the sources input at the MULTI CH
INPUT jacks.
Selects the number of channels input from an external decoder.
Selects the analog jacks at which the front channel signals from an external decoder are input
when you set "INPUT CH" to "8CH".
Parameter
DIMMER
Adjusts the brightness of the front panel display.
OSD SHIFT
Adjusts the vertical position of the OSD.
OSD-SOURCE
Sets the amount of time to display the iPod menu in the video monitor
after you perform a certain operation.
OSD-AMP
Sets the amount of time to display the status information screen after
you perform a certain operation.
FL SCROLL
Selects the mode to display the information of the iPod in the front
panel display.
VIDEO CONV.
Selects whether to convert the video signals input at the VIDEO,
S VIDEO, and COMPONENT VIDEO jacks.
HDMI RES.
Selects whether this unit activates the HDMI up-conversion of the
analog video signals input at the VIDEO, S VIDEO, and
COMPONENT VIDEO jacks so that the up-scaled video signals are
output at the HDMI OUT jack.
HDMI ASPECT
Adjusts the aspect ratio for analog video signals output at the HDMI
OUT jack.
—
Prevents accidental changes to sound field program parameter values
and other system settings.
Functions
Functions
Page
85
86
86
86
86
87
87
87
87
Page
88
88
88
88
88
88
89
89
90
Publicidad
