Use this feature to reset all the parameters of this unit to the initial factory settings.
Notes
• This procedure completely resets all the parameters of this unit including the "SET MENU" parameters.
• The initial factory settings are activated next time you turn on this unit.
y
To cancel the initialization procedure at any time without making any changes, press L SYSTEM OFF on the front panel.
Press L SYSTEM OFF on the front panel to
1
set this unit to the standby mode.
Press and hold M TONE CONTROL and
2
then press K MAIN ZONE ON/OFF to turn
on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
While holding
TONE CONTROL
down
Rotate the N PROGRAM selector to select
3
"INIT".
Press M TONE CONTROL repeatedly to
4
select "ALL".
y
Select "CANCEL" to cancel the initialization procedure
without making any changes.
Press L SYSTEM OFF to confirm your
5
selection and set this unit to the standby
mode.
Resetting the system
MAIN ZONE
ON/OFF
RESETTING THE SYSTEM
119
En