Yamaha RX-V863 Guia De Inicio Rapido página 80

Customizing this unit (MANUAL SETUP)
Measure for the speaker size
The woofer section of a speaker is
– 16 cm (6.5 in) or larger: large
– smaller than 16 cm (6.5 in): small
Front speakers FRONT SP
A)SPEAKER SET
FRONT SP
SMALL >LARGE
Choice
LARGE Select this setting when the front speakers are
large.
SMALL Select this setting when the front speakers are
small.
Note
When "LFE/BASS OUT" is set to "FRONT", you can select only
"LARGE" in "FRONT SP". If the value of "FRONT SP" is set to
other than "LARGE" in advance, this unit change the value to
"LARGE" automatically.
Center speaker CENTER SP
A)SPEAKER SET
CENTER SP
NONE >SMALL LARGE
When the center speaker is large:
Select "LARGE" (large).
When the center speaker is small:
Select "SMALL" (small).
When you do not use the center speaker:
Select "NONE" (none). The center channel signals are
directed to the front left and right speakers.
Choice
LARGE Select this setting when the center speaker is
large.
SMALL Select this setting when the center speaker is
small.
NONE Select this setting when you do not use the center
speaker. The center channel signals are directed
to the front left and right speakers.
78
En
Descriptions
Descriptions
Surround left/right speakers SUR. L/R SP
A)SPEAKER SET
SUR. L/R SP
NONE >SMALL LARGE
Choice
LARGE Select this setting when the surround speakers
are large.
SMALL Select this setting when the surround speakers
are small.
NONE Select this setting when you do not use the
surround speakers. This unit is set to the Virtual
CINEMA DSP mode (see page 51), and "SUR.B
L/R SP" is automatically set to "NONE".
Surround back left/right speakers
SUR.B L/R SP
A)SPEAKER SET
SUR.B L/R SP
SMLx1 >SMLx2 LRGx1
Choice
LRGx1 Select this setting when the single surround back
speaker is large.
Select this setting when the surround back left
LRGx2
and right speakers are Large.
SMLx1 Select this setting when the single surround back
speaker is small.
SMLx2
Select this setting when the surround back left
and right speakers are small.
NONE Select this setting when you do not use the
surround back speakers. The surround back
channel signals are directed to the surround left
and right speakers.
Note
If the Dolby TrueHD audio signals are input and "SUR.B L/R
SP" is set to "NONE", the left and right surround back channels
are not directed to the surround left and right speakers.
Descriptions
Descriptions