APRILIA LEONARDO 125 2006 Uso Y Mantenimiento página 227

Leonardo125-300_UK.book Page 51 Monday, November 17, 2003 2:06 PM
CHECKING THE STEERING
Carefully read p. 39 (MAINTENANCE).
Occasionally check the steering slack.
To check the steering:
◆
Position the vehicle on the centre stand.
NOTE
Prepare a support whose height
should be:
! "
√ 235 mm
#
√ 185 mm
300
The support base must measure 200 x 200
mm.
◆
Place the support under the vehicle and
a spongy cloth between them, so that the
front wheel can move freely and the
vehicle cannot fall down.
All manuals and user guides at all-guides.com
!
CAUTION
Make sure that the vehicle is stable.
◆
Shake the fork in the riding direction (see
figure).
!
CAUTION
Do not shake the fork excessively,
o t h e r w i s e y o u m a y
consideration the movement of the
stand, thus observing an incorrect
slack.
Repeat the previous operation more
than once.
◆
If you find that there is a considerable
slack, contact your aprilia Official Dealer
t o r e s t o r e t h e o p t i m a l s t e e r i n g
conditions.
CHECKING
THE ENGINE FULCRUM AXIS
Carefully read p. 39 (MAINTENANCE).
Periodically check the slack existing
between the engine pin bushings.
To carry out this operation, proceed as
follows:
t a k e i n
◆
Position the vehicle on the centre stand.
◆
Shake the wheel transversally with
respect to the riding direction.
◆
If any slack should be noticed, contact
your aprilia Official Dealer, to restore the
optimal operating conditions.
use and maintenance Leonardo 125 - 150 - 250 - 300
51