Publicidad
Idiomas disponibles
Idiomas disponibles
Leonardo125-300_UK.book Page 63 Monday, November 17, 2003 2:06 PM
CHANGING
THE HEADLIGHT BULBS
Carefully read p. 62 (BULBS).
The headlight contains:
√ Two low/high beam bulbs.
√ One parking light bulb (two parking light
5 3
bulbs
).
To ch an ge the b ul bs , pro ce ed as
follows:
◆
Remove the front cover, see p. 53
(REMOVING THE FRONT COVER).
◆
Unscrew and remove the screws (1) and
take the washers.
◆
Remove
the
air
conveyor
withdrawing it from the upper pins.
NOTE
Do not remove the protection
element (3) completely, since it is fixed to
the headlight body with two rivets.
◆
By lifting the upper fastening tang, move
the protection element (3) with your hands.
All manuals and user guides at all-guides.com
LOW BEAM BULBS/HIGH BEAM BULBS
(HALOGEN)
!
CAUTION
To extract the bulb electric connector,
do not pull its electric wires.
◆
Grasp the bulb electric connector (4),
pull it and disconnect it from the bulb (5).
◆
Rotate the bulb socket (6) anticlockwise
and extract it from the reflector.
◆
Extract the bulb (5).
For the reassembly:
NOTE
Insert the bulb (5) in the reflector,
(2)
by
by making the two elements (7) on the bulb
coincide with the respective guides (8) on
the reflector.
◆
Position the bulb socket (6) in the
reflector and rotate it clockwise.
◆
Connect the bulb electric connector (4).
5 3
LOW/HIGH BEAM BULBS
◆
Rotate the bulb socket (9) anticlockwise
and extract it from its seat.
◆
Slightly press the low/high beam bulb
(10) and rotate it anticlockwise, extract it
and replace it with a new one of the
same type.
PARKING LIGHT BULBS
!
CAUTION
To extract the bulb socket, do not pull
its electric wires.
◆
Grasp the bulb socket (11), pull it and
take it out of its seat.
◆
Extract the parking light bulb (12) and
replace it with a new one of the same
type.
use and maintenance Leonardo 125 - 150 - 250 - 300
63
Publicidad
