Technical Specifications - baltur GI MIST 1000 DSPGM Manual De Instrucciones

TECHNICAL SPECIFICATIONS

MODEL
E
N
G
L
I
S
H
TECHNICAL AND FUNCTIONAL
CHARACTERISTICS
• Alternate natural gas/light oil burner.
• Two-stage progressive output operation.
• Ability to operate with output modula-tion by means of automatic
RWF40 regu-lator mounted on the control panel (to beordered
separately with the modulationkit).
• Ability to operate with any type of com-bustion chamber.
• Air-gas mixing at blast-pipe and highpressure mechanical atomi-
sation of fuelusing nozzle.
• Ability to obtain optimal combustionvalues by regulating combu-
stion air andblast-pipe.
• Maintenance facilitated by the fact thatthe mixing unit and the
atomisation unitcan be removed without having to remo-ve the
burner from the boiler.
• Minimum and maximum air flow regula-tion for first and second
THERMIC CAPACITY
FLOW RATE
REGULATOR INLET PRESSURE
IGNITION TRANSFORMER
THERMIC CAPACITY
FLOW RATE
MAX FUEL VISCOSITY
IGNITION TRANSFORMER
VOLTAGE
FAN MOTOR
PUMP MOTOR
ABSORBED ELECTRICAL POWER
STANDARD ACCESSORIES
BURNER FIXING FLANGE
INSULATING GASKET
FILTER
FLEXIBLE PIPE
STUD BOLTS
EXAGONAL NUTS
FLAT WASHERS
GI mist 1000 DSPGM
MAX kW
MIN kW
MAX m /h
3
MIN m /h
3
mbar
MAX kW
MIN kW
MAX kg/h
MIN kg/h
Volt
kW .
kW
kW
stage by meansof electric servomotor with pause closu-re of gate
to prevent any heat dispersionto flue.
• Valves tightness control device com-pliant with European standard
EN676.
• Prepared for automatic fuel switching.
4 / 32
0006080764_201006
10 500
2 500
1 056
251
350
8kV - 20mA
10 500
2 500
885
211
1,5° E - 20° C
8kV - 30mA
3N ~ 400V - 50 Hz
22 x 2800 r.p.m
4 x 1400 r.p.m.
26,6
n° 1
n° 2
n° 1 - Rp 2"
n° 2 -1"1/2 X 1500
n° 8 M16 x 72
n° 8 M16
n° 8 M16